1. Home
  2. Blink
  3. Blink Sync Module Offline? Lights Explained and Fixes

Blink Sync Module Offline? Lights Explained and Fixes

Some links in our guides may be affiliate links; we may earn a commission at no cost to you. Disclosure.

Quick answer

Solid blue with blinking green means the Sync Module is offline and trying to reconnect. Restart your router (30 seconds unplugged), then the Sync Module (10 seconds unplugged), re-enter your Wi-Fi password in the Blink app, and turn off any mesh pods or extenders while it reconnects.

Applies to: Blink Sync Module 2 and Sync Module XR. When the Sync Module is offline, the cameras linked to it also show offline.

What the Sync Module lights mean

Solid blue + blinking green

Offline, trying to reconnect to its previous Wi-Fi network.

Solid blue + solid green

Reconnected and working after a restart.

Solid red (during setup)

Can’t connect to Wi-Fi; the password may be wrong.

Blinking blue + solid green

Ready for setup after a power cycle.

Common causes

  • A power cut, or the module being unplugged for a long time.
  • A changed Wi-Fi password or new router settings.
  • Interference from mesh pods or Wi-Fi extenders.

Fix it in this order

  1. Restart the router. Unplug it for 30 seconds, then plug it back in.
  2. Restart the Sync Module. Unplug it for 10 seconds, then plug it back in.
  3. Re-enter your Wi-Fi password in the Blink app to refresh the connection, especially if you changed the password.
  4. Turn off pods and extenders so only the main router is on. Reconnect them once the Sync Module is online.
  5. Delete and re-add the Sync Module in the app if it still won’t connect.

Sync Module XR with a MicroSD card

  1. Check the power adapter is firmly connected and the outlet works.
  2. Unplug it, remove the MicroSD card and check it for damage.
  3. Once the lights show solid blue and green, reinsert the card only if it’s undamaged or new. If it goes offline again, the card is likely faulty.

Cameras still offline?

Once the Sync Module is back, any camera still offline needs its own checks: see Blink camera offline.

Frequently asked questions

Do I need to reset the Sync Module?

Try the restarts and password refresh first. Deleting and re-adding the module is the last step.

Will my clips be lost?

Restarting doesn’t delete saved clips. Check MicroSD cards for damage if you use local storage.

Why does it go offline every night?

Look for a router that restarts or changes channel on a schedule, or an extender switching on and off.

Source: Blink Support: Sync Module Troubleshooting.

Last checked against official sources: October 2026. Stack Clarity is not affiliated with Blink or Amazon.

SUK

Writes and checks every Stack Clarity guide against official manufacturer documentation. Spotted something out of date? Tell us.

Comments