1. Home
  2. Fire TV
  3. Fire TV Remote Buttons Not Working? 7 Fixes by Button

Fire TV Remote Buttons Not Working? 7 Fixes by Button

Some links in our guides may be affiliate links; we may earn a commission at no cost to you. Disclosure.

Quick answer

Fire TV remote buttons not working while other buttons still respond usually means the remote is still paired. Start with fresh AAA batteries and a Fire TV restart. If Home, Back or the app buttons still fail, reset the remote for your model and re-pair it by holding Home for 10 seconds.

Applies to: Fire TV devices used with the Alexa Voice Remote (1st and 3rd generation, 2024 Release, Enhanced), Alexa Voice Remote Pro, Fire TV Remote (2026 Release) and the Basic Edition Remote.

This guide covers a few dead buttons on a remote that otherwise works. If nothing responds at all, start with our guide to a Fire Stick remote that is not working at all.

Fire TV remote buttons not working: match the button to the fix

Button that does nothing Most likely cause Where to start
Volume, Mute or Power TV or soundbar control is not set up Fix 6
Home, Back, Menu or Select Weak batteries, a Fire TV glitch, or a remote needing a reset Fix 1, then Fix 2, then Fix 4
Preset app buttons (four buttons in two rows) The app itself is not opening Fix 2 and Fix 5
Buttons 1, 2 or Star (Pro and 2026 Release remotes) No shortcut assigned, or a Child profile Fix 5
One single button, even after a reset Likely physical damage to that key Fix 7

Fix 1: Put in fresh AAA alkaline batteries

Low batteries can let some presses through and drop others. Amazon recommends AAA alkaline batteries.

  1. Slide the battery cover down. On models with a latch, press the arrow to release it first.
  2. Put in two new AAA alkaline batteries, matching the + and - marks.
  3. Slide the cover up until it clicks, then test the dead buttons.

Replace both batteries together with a pair from the same pack.

Fix 2: Restart your Fire TV

If only Home or Back fails, the Fire TV itself may be stuck. Amazon lists two ways to restart:

  • From the menu: go to Settings > My Fire TV > Restart. The navigation ring and Select get you there even without Home.
  • By unplugging: unplug the power, wait at least 3 seconds (Amazon's restart page), then plug it back in.

Fix 3: Use troubleshooting mode to test the remote

Press the Alexa Voice button. If the light at the top flashes, your remote has Amazon's troubleshooting mode. Remotes with no light do not.

  1. Hold Rewind and Right on the navigation ring together for 3 seconds.
  2. Press Menu. The light turns green.
  3. Press any button and watch the light colour (see the table below).
  4. To leave the mode, hold Play/Pause and Up for 3 seconds, press Menu, then take the batteries out and put them back in.
Light colour What Amazon says it means What to do
Red, slow blink Low battery Fix 1
Red, fast blink Remote fault Fix 4 (reset)
Orange Remote is not paired Restart the Fire TV, then hold Home for 10 seconds
White Fire TV may be off Check the Fire TV is on, then restart it
Blue Remote is working Restart the Fire TV (Fix 2)

Amazon's page does not test individual buttons. The colour describes the whole remote, which still rules out batteries and pairing.

Fix 4: Reset the remote for your model and pair it again

A reset clears the remote's memory. Use the steps for your remote.

Most Fire TV remotes

  1. Unplug the Fire TV from power and HDMI, then wait 60 seconds.
  2. Hold Left, Menu and Back together for 12 seconds.
  3. Let go, wait 5 seconds, then take the batteries out.
  4. Plug the Fire TV back in and wait until it says it cannot find your remote.
  5. Put the batteries back in and press Home. If the light blinks blue, it is paired. If not, hold Home for 10 seconds.

Alexa Voice Remote (1st generation)

Follow the same steps, but in step 2 hold only Left and Menu for 12 seconds.

Basic Edition Remote (no Alexa button)

  1. Hold Home and, while holding it, press Menu three times. Let go of Home.
  2. Press Menu nine times, then take the batteries out.
  3. Unplug the Fire TV from power and HDMI for 60 seconds, put the batteries back, and plug the Fire TV in.
  4. When the Home screen appears, hold Home for 40 seconds, then wait 60 seconds for setup to finish.

Fix 5: Fix app buttons and custom shortcut buttons

Preset app buttons

The Alexa Voice Remote (3rd generation and 2024 Release) has four buttons that open preset apps, which Amazon says can vary. Amazon gives no separate steps for them. If one fails, open the same app from your apps list. If it will not open there either, the app is the problem, not the button. For Netflix, see the related fixes below.

Buttons 1, 2 and Star

The Alexa Voice Remote Pro and the Fire TV Remote (2026 Release) have customizable buttons labelled 1, 2 and Star. Amazon says they need a paired remote, a Fire TV that is on, a distance of about 30 feet or less, and no Child profile.

  1. Press and hold the button for 5 seconds. A menu of suggested shortcuts appears.
  2. Pick an app or action. A message on screen confirms the new shortcut.
  3. Only installed apps can be assigned, so check the app is installed and opens.
  4. Pro remote only: if an Alexa command shortcut fails, say the command aloud. If it works, reassign the button with it.
  5. Still stuck? Unplug the Fire TV for one minute and try again.

Fix 6: Volume, Mute or Power not working

These buttons control your TV or soundbar, not the Fire TV, so they can fail on a healthy remote. Our guide on Fire Stick volume not working covers setting up TV control.

Fix 7: When one button stays dead after a reset

If one key is still dead after batteries, a restart and a reset, it is most likely worn or damaged, for example after a drop or spill. To confirm, use the Fire TV app on your phone (same Wi-Fi network). If the app can do what the button cannot, the remote is at fault, and a replacement that lists your Fire TV model as compatible is the practical fix.

Where to get one

Affiliate links. Stack Clarity may earn a commission at no extra cost to you. We have not tested these products; check current prices and reviews on Amazon.

Frequently asked questions

Why are some buttons not working on my Firestick remote?

If the navigation ring works, the remote is still connected. Fire TV remote buttons not working in this way usually come down to batteries, a Fire TV glitch or a remote needing a reset. Work through Fix 1 to Fix 4.

Why is my Firestick remote Home button not working?

Try fresh batteries and restart from Settings > My Fire TV > Restart. If Home still fails, reset and re-pair the remote.

How do I fix the app buttons on my Fire TV remote?

Check the app opens from your apps list. For 1, 2 and Star buttons, hold the button for 5 seconds and choose a shortcut again.

Can I control my Fire TV while I wait for a new remote?

Yes. The Fire TV app for iPhone and Android works as a remote on the same Wi-Fi network, signed in with your Amazon account.

Related fixes

All guides: Fire TV troubleshooting hub

SUK

Writes and checks every Stack Clarity guide against official manufacturer documentation. Spotted something out of date? Tell us.

Comments