Quick answer
Kasa plugs only join 2.4 GHz Wi-Fi. Put the plug in setup mode (Wi-Fi light blinking orange and green; hold the button about 5 seconds if it isn’t), turn on the Kasa app’s Local Network permission on iPhone, turn off any phone VPN, and re-enter your Wi-Fi password carefully. On dual-band or mesh routers, separate or temporarily disable the 5 GHz band.
Applies to: TP-Link Kasa smart plugs and switches (for example HS103, HS105, KP115, EP10, EP25). Kasa bulbs use different setup lights. Tapo devices are a separate TP-Link range.
Read the Wi-Fi light first
Setup mode, ready to connect. (On the HS105 it blinks orange and blue.)
Connected to your network. Don’t restart setup; force-close and reopen the Kasa app and wait.
Factory reset in progress.
Fix 1: Put the plug in setup mode
Hold the reset/control button for about 5 seconds until the light blinks orange and green. This keeps your settings. Holding for about 10 seconds (light blinking orange rapidly) is a full factory reset that erases schedules and account links.
Fix 2: Check your phone
- Make sure your phone is on your home Wi-Fi with internet access.
- Force-close the Kasa app and reopen it.
- iPhone: go to Settings › Kasa and turn on Local Network.
- Turn off any VPN or ad-blocking app on the phone.
- If the app can’t reach the plug, join its network manually in your phone’s Wi-Fi settings (named like TP-Link_Smart Plug_XXXX), then go back to the app and tap Try Again.
Fix 3: Re-enter the Wi-Fi password
A mistyped password is the most common cause. TP-Link notes the password must be 64 characters or fewer and must not contain single or double quotation marks.
Fix 4: Deal with 5 GHz and mesh routers
- Give your 5 GHz band a different network name from 2.4 GHz, or switch 5 GHz off temporarily during setup.
- If you can’t disable 5 GHz, set up the plug farther from the router so it falls back to 2.4 GHz, which has longer range.
- Move the plug closer to the router if the signal is weak.
Fix 5: Router settings (advanced)
With your router’s documentation or support, TP-Link suggests: WPA2-AES encryption, channel 1, 6 or 11, 20 MHz channel width, and turning off AP/client isolation. If the light is solid green but the plug never appears in the app, setting the router’s DNS to 8.8.8.8 and 8.8.4.4 can help.
Fix 6: Try another phone
If setup still fails, try a different phone or tablet. Phone settings and saved networks can block setup.
Frequently asked questions
Do Kasa plugs work with 5 GHz Wi-Fi?
Kasa plugs connect on 2.4 GHz. Dual-band routers with one shared name can confuse setup, so separate the bands if setup fails.
Will resetting the plug delete my schedules?
A 5-second hold keeps settings; a 10-second factory reset erases them.
Why does my Kasa plug keep going offline?
Weak 2.4 GHz signal or router changes are the usual cause. Move it closer to the router or check the router’s settings.
Sources: TP-Link Support: Kasa device not connecting: troubleshooting setup issues; How to reset a Kasa smart plug or switch.
Last checked against official sources: October 2026. Stack Clarity is not affiliated with TP-Link.
Comments
Post a Comment