1. Home
  2. Fire TV
  3. Fire Stick Not Working After Update? 8 Fixes in Order

Fire Stick Not Working After Update? 8 Fixes in Order

Some links in our guides may be affiliate links; we may earn a commission at no cost to you. Disclosure.

Quick answer

If your Fire Stick is not working after an update, first give it up to 25 minutes to finish, then force a restart by holding Select and Play/Pause together for about 5 seconds. If the update failed, check your internet connection and make sure at least 500 MB of storage is free, then run Check for System Update again.

Applies to: Amazon Fire TV Stick, Fire TV Stick Lite, Fire TV Stick 4K and 4K Max, and Fire TV Cube, using the Alexa Voice Remote or Fire TV remote. Fire TV smart TVs use some different steps.

When a Fire Stick is not working after an update, it usually freezes on a screen, stops the update halfway, or shows apps and a home screen that act strangely. Work through the fixes below in order. They start with the quickest and safest and end with a factory reset, which you should only use as a last resort.

Fire Stick not working after update: match your symptom

Find the line that matches what you see, then jump to the suggested fix.

What you see What it often points to Try first
Stuck on a downloading or installing screen The update is still running, or the connection is slow Fix 1, then Fix 4
A message that the update failed or could not finish Weak internet or less than 500 MB of free storage Fix 4, then Fix 5
Frozen on the logo or one screen The device is still busy or needs a restart Fix 1, then Fix 2
Black screen or no signal after the restart Power or HDMI connection problem Fix 3, then Fix 7
Apps crash or will not open after the update The app itself needs attention Our apps guide (linked in Fix 6)
Remote stopped responding Batteries or remote pairing Our remote reset guide (linked in Fix 6)

Fix 1: Give the update time to finish

While an update installs, the screen can look stuck even when the device is still working. Amazon's frozen-screen help page says to let the device sit, turned on, for 25 minutes or until the screen changes. Amazon does not say exactly how long an update takes, so it is worth waiting the full 25 minutes before you unplug anything.

Leave the remote alone while you wait. Pressing buttons will not speed up an install, and it makes it harder to tell whether the stick is really frozen.

Fix 2: Restart the Fire Stick

If the screen has not changed after waiting, a restart is the next step. Amazon gives two ways to do it.

Restart with the remote

  1. Point the remote at the Fire Stick.
  2. Press and hold Select (the center button) and Play/Pause at the same time.
  3. Keep holding for about 5 seconds, until the device restarts.

Restart by unplugging

  1. Unplug the power cord from the Fire Stick or from the wall outlet.
  2. Wait 60 seconds.
  3. Plug it back in and wait for the home screen to load.

Fix 3: Use the power adapter that came with it

Amazon says to use the power cord and adapter included with your Fire TV, because that makes sure the device gets enough power. If you have been powering the stick from a TV USB port or a different phone charger, switch to the original adapter plugged into a wall outlet. If you lost the original, Amazon recommends replacing it with Amazon-branded equipment.

Fix 4: Check your internet connection

Amazon lists the internet connection as the first thing to check when an update fails. To test it on the Fire Stick:

  1. Go to Settings > Network.
  2. On the Network screen, press Play/Pause on the remote to check the connection.
  3. If there is a problem, restart your modem and router, then test again.

Fix 5: Free up at least 500 MB of storage

Amazon's help page on failed updates says the update needs at least 500 MB of free space.

  1. Go to Settings > My Fire TV (on some models, Device & Software) > About > Storage.
  2. Check how much space is available.
  3. If it is under 500 MB, uninstall apps you no longer use, then try the update again.

Fix 6: Run the update again by hand

Once the connection and storage are fine, start the update yourself so it can finish properly:

  1. Open Settings.
  2. Select My Fire TV or Device & Software, depending on your device.
  3. Select About.
  4. Select Check for System Update and install anything it finds.

If the system update finished but a single app now crashes or will not open, the problem is usually with that app rather than the Fire Stick. Our guide to apps not working on Fire Stick walks through clearing the cache, updating and reinstalling. If the remote stopped responding after the restart, follow our steps to reset a Fire TV remote and pair it again.

Amazon's update page does not say whether the device restarts during an install or how long it takes, so be patient and avoid unplugging the stick while an update progress screen is still changing.

Fix 7: Check the HDMI setup

If the stick seems to restart but you see a black or frozen screen, Amazon suggests checking the connection to the TV:

  • Use a high-speed HDMI cable.
  • Try a different HDMI port on the TV.
  • If you use an HDMI hub, plug the Fire Stick straight into the TV instead.
  • Test with and without any HDMI adapter or extender.
  • Check your TV manual to confirm the TV is HDCP-compliant, and try a different TV if you can.

Fix 8: Factory reset as a last resort

A reset puts the software back to a clean state, but it erases a lot. Amazon says it removes your account information and all downloaded content, including in-app purchases. You will need to sign in and reinstall your apps afterward.

Reset with the remote

  1. If you use expandable storage, safely eject it first.
  2. Press and hold Back and the right side of the navigation circle together for 10 seconds.
  3. Choose to continue on the TV screen. If you do nothing, the reset starts on its own after a few seconds.

Reset from Settings

  1. Go to Settings > My Fire TV > Reset to Factory Defaults.
  2. Confirm, then follow the on-screen steps to pair your remote when the reset finishes.

If none of these fixes help, Amazon points to its Fire TV forum and Fire TV support for more help.

Frequently asked questions

Why is my Fire Stick stuck on update?

Most often the update is still installing, or it stalled because of a weak connection or low storage. Wait up to 25 minutes, restart the stick, then check your network and make sure at least 500 MB is free before trying again.

How do I fix a Fire TV that is unable to update?

Test the connection in Settings > Network, restart your router, unplug the Fire TV for one minute, and free up storage. Then go to Settings > My Fire TV > About > Check for System Update.

Is it safe to unplug a Fire Stick during an update?

Amazon does not say directly. It is safest to wait the full 25 minutes first. If the screen has not changed after that, Amazon's own advice is to restart or unplug the device.

Will a factory reset fix a Fire Stick not working after an update?

It can, but it erases your account information and downloaded content. Try every other fix first, and only reset if the stick still freezes or will not finish the update.

Related fixes

All guides: Fire TV troubleshooting hub

SUK

Writes and checks every Stack Clarity guide against official manufacturer documentation. Spotted something out of date? Tell us.

Comments