1. Home
  2. Nest
  3. Nest Thermostat Black Screen? 7 Fixes by Light and Model

Nest Thermostat Black Screen? 7 Fixes by Light and Model

Some links in our guides may be affiliate links; we may earn a commission at no cost to you. Disclosure.

Quick answer

A Nest thermostat black screen usually means the screen is asleep, the internal battery has run down because power is not reaching it, or it froze during a software update. Walk up to it or press it first, then pull the display off the base and click it back on. The light you see (or do not see) tells you which fix below to use.

Applies to: Nest Learning Thermostat (4th gen), Nest Learning Thermostat (3rd gen and earlier), Nest Thermostat E, and Nest Thermostat (the touch bar model with AAA batteries).

Nest thermostat black screen: check the light first

Google's help pages give each light a different meaning, so look closely before you start. The Nest Thermostat has a touch bar on the right side. The Learning Thermostat and Thermostat E have a ring you turn and press.

What you see Model What Google says it means Go to
Black screen that wakes when you walk up All Normal: the screen turns off when it does not sense motion Fix 1
Blinking green light 3rd gen or earlier, Thermostat E Updating, starting up or restarting Fix 3
Blinking red light 3rd gen or earlier, Thermostat E Battery very low but charging Fix 4
Dark yellow light Learning Thermostat (4th gen) Battery very low but charging Fix 4
No light at all, will not wake Learning Thermostat, Thermostat E Battery drained; not enough power reaching it Fixes 2, 5, 6
Touch bar does nothing Nest Thermostat Batteries drained or a power issue Fix 7

Fix 1: Make sure the screen is not just asleep

Google explains that the screen can turn off during normal use when it does not sense motion. It turns back on when someone comes near or uses the app.

  1. Stand in front of the thermostat for a few seconds.
  2. Press the display until it clicks (ring models) or tap the touch bar (Nest Thermostat).
  3. Change the temperature by one degree in the Google Home or Nest app and see if the screen wakes.

If it wakes and works, nothing is wrong. On the Learning Thermostat (3rd and 4th gen), Farsight can show the time, weather or temperature from across the room.

Fix 2: Reseat the display on the base

Google says a display that is not fully seated will not turn on and cannot charge its battery.

  1. Pull the display straight off the base.
  2. Gently push any wires sticking out of the wall back in.
  3. Line up the connectors and press the display on until it clicks.

If the base was mounted with screws that did not come in the Nest box, Google notes the display might not attach properly. Use the included screws.

On the 4th gen, look at the base while the display is off. Google says if the level at the top does not light up, the thermostat is not getting power. Skip to Fix 5.

Fix 3: Blinking green light? Wait, then restart

Google says a blinking green light normally lasts a minute or 2. If the thermostat stays unresponsive for more than 15 minutes, it may have frozen during an update. Our guide to the Nest thermostat blinking green light goes deeper.

  1. Wait at least 15 minutes.
  2. Pull the display off, check the pin connector lines up, and click it back on.
  3. Still stuck? Press the thermostat down until the screen turns off (about 10 seconds), then press and release the ring to restart it.

Google warns a manual restart can lose unsaved information. Use it only when the thermostat is frozen and you cannot restart from the menu.

Fix 4: Red or yellow light? Let the battery charge

A blinking red light (3rd gen or earlier, Thermostat E) or dark yellow light (4th gen) means the battery is very low but charging. Google says this can take several minutes up to an hour, and you should wait for it to turn on before running your heating or cooling. If the red light keeps returning, see our Nest thermostat blinking red light fixes.

Charge it faster with USB

  1. Pull the display off the base.
  2. Plug a USB cable into the back (USB-C on the 4th gen; mini or micro USB on older models) and connect it to a wall charger.
  3. When the screen asks, click the display back onto the base.

Google says not to charge from a computer or other unpowered USB port. USB charging is temporary: if the power problem is not fixed, the thermostat will lose power again.

Fix 5: Check that your system has power

The Learning Thermostat and Thermostat E charge from your system's wires. No power to the system means the battery drains and the screen goes black.

  1. Turn the breaker or switch for your furnace or air handler off, then fully back on.
  2. If you have a fuse box, check the fuse for the system and replace it if it is blown.

Google also notes a clogged air filter can make a system overheat and shut off, which stops the thermostat from charging.

Fix 6: Check the wiring and power readings

  1. Turn off power to your system at the breaker, fuse box or system switch.
  2. Pull the display off. Remove and inspect one wire at a time.
  3. The bare end should be clean, straight and about 3/8 inch (1 cm). Trim and re-strip bent or corroded ends.
  4. Reinsert each wire. The connector button should stay down.
  5. Click the display back on and restore power.

If it turns on but keeps losing power, go to Settings, Technical Info, Power and check the Voc, Vin and Iin values. Google says readings outside the recommended ranges point to a wiring or system issue, and you may need a C wire or a Nest Power Connector. Millivolt, high voltage, proprietary and solid fuel systems are not compatible.

Fix 7: Nest Thermostat - reseat or replace the AAA batteries

When its 2 AAA batteries run low, Google says the Nest Thermostat turns off Wi-Fi and motion sensing, then shuts off completely.

  1. Pull the thermostat off its base and remove both batteries.
  2. Check nothing sits between the batteries and the terminals, then reinsert them matching the + and - marks.
  3. Press it back onto the base until it clicks.
  4. Still black? Fit 2 new 1.5 V AAA alkaline batteries from a known brand.

Where to get one

Affiliate links. Stack Clarity may earn a commission at no extra cost to you. We have not tested these products; check current prices and reviews on Amazon.

If nothing works, Google suggests testing with your old thermostat. If the system works with it, the Nest may be damaged; if not, call a local HVAC professional.

Frequently asked questions

Why is my Nest thermostat screen black but the heat still works?

The screen is most likely asleep. It turns off when it does not sense motion and wakes when someone comes near.

What does a Nest thermostat black screen with a blinking green light mean?

It is updating or restarting. After 15 minutes, reseat the display, then hold it down about 10 seconds to restart.

Why will my Nest thermostat not turn on after a power outage?

The battery may have drained. Check the breaker or system switch, then let it charge for up to an hour.

Can I charge a Nest thermostat from my laptop?

No. Google says to use a wall charger, not a computer USB port.

Related fixes

All guides: Smart home troubleshooting hub

SUK

Writes and checks every Stack Clarity guide against official manufacturer documentation. Spotted something out of date? Tell us.

Comments