1. Home
  2. Nest
  3. Nest Thermostat Blinking Green and Orange? What to Check First

Nest Thermostat Blinking Green and Orange? What to Check First

Some links in our guides may be affiliate links; we may earn a commission at no cost to you. Disclosure.

Quick answer

A Nest thermostat blinking green and orange is not a pattern Google explains on its light page, so treat it as a likely power problem first. Let the thermostat charge for up to an hour, check that your heating and cooling system has power, then charge the battery by USB. On a Learning Thermostat (4th gen), a dark yellow light means the battery is very low but charging.

Applies to: Nest Learning Thermostat (4th gen), Nest Learning Thermostat (3rd gen or earlier), Nest Thermostat E and the battery-powered Nest Thermostat. A short section covers the Heat Link.

The same color can mean different things on different Nest models, so first work out what you are looking at. Then follow the fixes in order, quickest first.

Nest thermostat blinking green and orange: what Google says

Here is what Google's help pages say, model by model.

What you see Model Meaning from Google Try first
Dark yellow light Learning Thermostat (4th gen) Battery very low but charging Fix 1
Blinking red 3rd gen or earlier, Thermostat E Battery very low but charging Fix 1
Blinking green 3rd gen or earlier, Thermostat E Updating, starting up or restarting Wait a minute or 2, then Fix 6
No light Learning Thermostat, Thermostat E Battery has drained, or too little power is reaching it Fix 2
Orange screen background Screen color, not a warning light The system is heating Nothing to fix
Blinking green and orange Not listed Google's light page does not cover it Fix 1

Google's light page lists no orange light and no mixed green and orange pattern. In Google's community forum, staff specialists have said flashing orange or red can point to a power problem, and that an orange light usually means a very low battery. That is forum advice, so treat it as a first guess, not a confirmed meaning.

If the light is on a Heat Link

A Heat Link is a separate box, and Google lists its startup steps under a note for EU users, so most US homes will not have one. On the 2nd gen Heat Link, alternating yellow and green means it is searching for a thermostat to pair with, and quickly alternating means it is resetting. Orange is not listed for any Heat Link.

Fix 1: Let the battery charge

Learning Thermostats and the Thermostat E have a rechargeable battery that charges through your system wires. Google says charging can take several minutes or up to an hour. Wait until it is charged before you use heating or cooling. If you only see blinking green, read our guide to the Nest thermostat blinking green light. For red on an older model, see the blinking red low battery fixes.

Fix 2: Check that the display and system have power

  1. Make sure the display is pressed fully onto the base.
  2. Check that your heating and cooling system is switched on.
  3. Reset the breaker or system switch and look for a blown fuse.

On the Nest Thermostat and the 4th gen, open Settings > Equipment (Wiring Info on the 4th gen). Google says gray wires are not sending voltage. If all of them are gray, the system is probably off or has a power problem.

Fix 3: Charge the thermostat by USB

  • 4th gen: use a USB-C cable and a wall charger.
  • 3rd gen or earlier and Thermostat E: use a mini or micro USB cable, depending on the model.
  • All of these: do not use a computer or an unpowered USB port.

If the battery keeps running down, the system wires may not be sending enough power, so keep going to Fix 5 and Fix 7.

Battery-powered Nest Thermostat

Google's steps for this model use batteries, not USB. Take out the batteries and put them back in, matching the + and - marks. If that fails, fit two high-quality 1.5 V AAA alkaline batteries.

Where to get one

Affiliate links. Stack Clarity may earn a commission at no extra cost to you. We have not tested these products; check current prices and reviews on Amazon.

Fix 4: Read the power numbers

On ring models, press the ring, then go to Settings > Technical Info > Power. Sections vary by model.

Reading What Google says
Battery above 3.6V Normal while charging
Battery below 3.6V Wi-Fi turns off, updates wait and the screen is disabled to save charge
Battery at 3.7V Needed to install a software update
Voc and Vin Normally 29 to 42V
Iin with a C wire Normally 100 to 200 mA (Learning Thermostat and E)
Iin without a C wire or with a Power Connector Normally 20 to 40 mA (Learning Thermostat and E)

Green means an update or restart, and low power holds updates back, which may be why both colors appear. That is our reading, not a statement from Google.

Fix 5: Check the wires

  1. Turn off the system at the breaker, fuse box or system switch.
  2. Pull the display off the base. On the 4th gen, confirm the light is off first.
  3. Check that each wire is fully inserted and the connector button stays down.
  4. If an end is bent or corroded, straighten it or strip it so about 3/8 inch of clean copper shows.
  5. Push the wires back into the wall, snap the display on and turn the power back on.

If the screen shows a help code, look it up on Google's help code page, because the numbers differ by model.

Fix 6: Restart the thermostat

  • 4th gen and Nest Thermostat: go to Settings > Restart.
  • Thermostat E and 3rd gen or earlier: go to Settings > Reset > Restart.
  • Frozen ring model: press the thermostat down for about 10 seconds until the screen turns off, then press and release the ring.
  • Frozen Nest Thermostat: take it off the base, remove both AAA batteries, put them back and press it on until it clicks.

Google says a forced restart can lose unsaved information, so use it only when the thermostat is stuck. If you ever do a factory reset, go to Settings > Equipment and write down your wire setup first.

Fix 7: Add a C wire or Nest Power Connector

A C wire does not control heating or cooling. It only supplies steady power. Google lists these signs of too little power: a battery that drains often, a display that will not turn on, a fan that runs constantly or cycles rapidly, and codes such as N260 or E1. If a power test says you need one, Google says you can request a Nest Power Connector for free. A new C wire usually needs a professional.

Fix 8: Call a professional or Google support

Google suggests having a local pro check the control board for a blown fuse. You can also test for damage by reinstalling your old thermostat, or contact Google Home and Nest support.

Frequently asked questions

Why is my Nest thermostat blinking green and orange?

Google's light page does not explain this pattern. Treat it as low power first: charge the battery, check system power and read the Power numbers.

What does a yellow light on a Nest thermostat mean?

On the Learning Thermostat (4th gen), a dark yellow light means the battery is very low but charging. Google says to wait until it is fully charged before using heating or cooling.

What does a blinking orange light on a Nest thermostat mean?

Google's help page does not list it. A Google forum specialist linked it to possible power problems, so start with Fix 1.

Is the orange screen on my Nest a problem?

No. Google says the screen background turns orange when the system is heating, blue when cooling and black when off or in Eco.

Related fixes

All guides: Nest and smart home troubleshooting hub

SUK

Writes and checks every Stack Clarity guide against official manufacturer documentation. Spotted something out of date? Tell us.

Comments